UHB-ZK Water Sand Salt horizontal centrifugal mortar pump for Wear resistant Industry.

Advantages of UHB-ZK mortar pump:
1. Strong wear resistance: all the over-current parts are made of steel-lined ultra-high molecular weight polyethylene (UHMW-PE). The wear resistance of ultra-high molecular weight polyethylene (UHMW-PE) ranks first in fluoroplastics, which is 10 times higher than that of carbon steel and stainless steel.
2. Strong impact resistance: the impact strength of UHMWPE ranks first among general engineering plastics and can be stable at minus 196 ℃, which is a property that any other plastics do not have.
3. Excellent corrosion resistance: the pump can withstand all kinds of corrosive media (acid, alkali, salt) and organic solvents in a certain temperature and concentration range.
4. No noise: the impact energy absorption of UHMWPE is the highest in plastics and has good anechoic property, thus minimizing the radiography produced by liquid flow in the process of transportation.

First, the operation method of desulphurization pump start-up:

• 1. Fill the pump with liquid.
• 2. Open the import valve immediately (if the import valve is an one-way check valve, there is no need for manual operation). Pay special attention to opening the inlet valve to the maximum position.
• 3. Connect the power supply.
• 4. Open the valve at the outlet.

• 1. If there is an abnormal noise in the operation, or the motor is hot and other abnormal conditions occur, the machine should be turned off and tested, and the detection method is the same as that before operation.
• 2. In operation, there should be no water on the motor to avoid damp.
• 3. Whether the lubricating oil in the bearing needs to be replaced on time.
• 4. The connection between the pump and the pipeline should maintain good tightness, especially the inlet must ensure that there is no air leakage.
• 5, should grasp the operation condition, immediately detect the current, voltage changes, and the temperature of the bearing is not higher than 75 degrees, to avoid accidents.
• 6. Stop immediately if abnormal noise is found in the operation process, and check the cause.

• 1. Under the condition of meeting the necessary flow rate and head, the structure performance should be advanced and reasonable, and the operation should be stable.
• 2. The sealing components should have strict and reliable performance and long service life.
• 3. Under the condition of corrosion resistance and temperature resistance, the pump is easy to install and disassemble and easy to maintain.
• 4. Light structure, low cost and energy saving economy.

If you need to order accessories, you can contact TEFLOW PUMPS.
Foreign trade manager.
Cheng.
Web site: www.tlumps.com.
Wechat: cqr15256333320 .
WhatsApp (Tel): + 86 (0086) 18130250095.
Email: tlumps@tlumps.com.
Anhui Tenglong pump Valve Manufacturing Co., Ltd.